Cut list calculator

Boards to buy · cut diagrams · blade width included

A plan tells you the pieces. It does not tell you how many boards to buy. Paste the cut list below and this works out the boards, where to cut each one, and what is left over — counting the wood the saw blade takes, which is the part everyone forgets.

Your cut list

Fractions, decimals and feet all work: 30 1/2", 30.5, 2' 6". Pieces are grouped by board, so a 2x4 is never cut from a 1x6.

Board lengths you can buy
Saw blade width

Every cut turns this much wood into sawdust.

How it works

It counts the blade

A standard circular saw blade is an eighth of an inch thick, and every cut turns that much board into sawdust. Four 24" pieces need 96" of wood plus four blade widths, so they do not come out of one 8 ft board — a fact usually discovered at the lumber yard. Each piece is costed at its length plus one cut.

It keeps boards apart

Pieces are grouped by the board they come from, so a 2x4 is only ever cut from a 2x4 and a shelf is never taken out of a rail. Each group is solved separately, and the shopping list names the board as well as the length.

It shows the offcuts

Every board is drawn to scale with its remaining length written out. A 14" offcut is a future brace; a 2" offcut is scrap. The tool will not quietly assume you are going to join two short pieces into a long one.

It stays on your machine

The whole calculation runs in the browser. Nothing is uploaded, nothing is stored and there is no account to make. It keeps working with the network off.

What it can read

Cut lists are written a dozen ways. All of these are read the same:

  • 4 - 2x4 @ 30 1/2"the usual form
  • (4) 2x4 @ 30.5"decimals
  • 4 pcs 2x4 @ 2' 6 1/2"feet and inches
  • 4 - 1×4 @ 24"a multiplication sign for the x
  • 2x4, 4, 30 1/2"pasted from a spreadsheet
  • 4 - 2x4 @ 30 1/2" (legs)labels are kept

Headings and notes are skipped rather than guessed at, and every line it could not read is listed back to you.

Questions

One piece per line, as quantity - board @ length. For example: 4 - 2x4 @ 30 1/2". Fractions, decimals and feet all work, so 30 1/2", 30.5 and 2' 6 1/2" are read the same way. Anything in brackets at the end is kept as a label, so you can write (legs) and see it on the cut diagram.