Wood Storage Stools
Easy to make DIY wood storage stools with reversible top for seating or surface use. Free.
Dimensions
Use the size-specific shopping and cut lists below.
What you need
- 1 - 1x12 project panel 6 feet long
- 1 - 1x18 project panel, 3 feet long
- 1 - 3/4" plywood scrap 16" x 16"
- 1 - 16" x 16" piece of foam, 2" thick
- Industrial strength velcro
- 24" x 24" minimum fabric, batting recommended if thin fabric
- 5/8" and 1-1/4" staples
- 4 - 2" caster wheels (2 should be locking if used as step stool)
- 3/4" screws to fit caster wheels if not supplied with casters
FOR ONE STORAGE STOOL
- 2 - 1x12 @ 16-1/2"
- 2 - 1x12 @ 18"
- 2 - 3/4" thick project panel 18" x 18" (top and bottom)
- 1 - 3/4" plywood @ 16" x 16"
- measuring tape
- pencil
- safety glasses
- hearing protection
- kreg-jig
- drill
- compound miter saw
- nailer
- sander
- staple gun
- countersink drill bit
Step by step
Step 1
Build the box using 3/4" pocket holes and 1-1/4" pocket hole screws.
Step 2
Attach bottom with nails or staples and wood glue.
Step 3
Attach caster wheels to bottom.
Step 4
Upholster the 3/4" plywood and attach to top with industrial strength velcro.
Step 5
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
