Small Pallet Inspired Coat Rack with Shelves
Simple to build wall organizer shelf with hooks - it's the perfect piece for hanging coats and dropping mail and accessories.
Dimensions
Use the size-specific shopping and cut lists below.
What you need
- 2 - 1x6 @ 8 feet long
- 1 - 1x4 @ 4 feet long
- 1 - 2x6 @ 8 feet or stud length
- 2-1/2" and 1-1/4" pocket hole screws OR 2-1/2" self tapping wood screws
- 2" self tapping wood screws
- 6 hooks
- 2 - 2x6 @ 17-1/2" - top corner cut off at 45 degrees (sides)
- 1 - 2x6 @ 47-3/4" (bottom)
- 1 - 1x6 @ 44-3/4" (shelf)
- 3 - 1x6 @ 47-3/4" (back)
- 1 - 1x4 @ 47-3/4" (front shelf/hook area)
- measuring tape
- square
- pencil
- safety glasses
- hearing protection
- kreg-jig
- drill
- circular saw
- countersink drill bit
Step by step
Step 1
Attach bottom to sides with either pocket holes (1-1/2" setting/2-1/2" pocket hole screws) or 2-1/2" wood screws countersunk. Then attach the shelf to the sides, (3/4" pocket holes - 1-1/2" pocket hole screws or 2-1/2" wood screws countersunk).
Step 2
Attach back boards to sides and shelves with 2" screws and glue. Use screws because you will hang the shelf from these back boards and nails may give over time.
Attach front 1x4 board with 2" screws and glue. Attach hooks to front of board.
Hang to at least two studs in the wall with wood screws through the back of the shelf.
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
