Simple Rustic Modern Console Table
Build your own rustic modern console table! This easy to tackle DIY project just uses a few boards and you can nail it all together.
Dimensions
Use the size-specific shopping and cut lists below.
What you need
- 1 - 1x12 @ 12 feet long (can be cut into 4 and 8 foot pieces for transport, do NOT cut in half)
- 1 - 1x10 @ 4 feet long
- 1-1/4" brad nails or 1-1/4" pocket hole screws if using a Kreg Jig
- wood glue
Wood used is whitewood or pine boards from Home Depot or Lowes
- 2 – 1×12 @ 29-1/4″ - legs
- 1 – 1×12 @ 48″ - top
- 1 – 1×12 @ 46-1/2″ - shelf
- 1 - 1x10 @ 46-1/2" - back
- measuring tape
- square
- pencil
- safety glasses
- hearing protection
- circular saw
- nailer
- sander
Step by step
Step 1
Attach the top to the legs with 1-1/4" brad nails and glue or use your Kreg Jig on the 3/4" setting with 1-1/4" pocket hole screws. You can alternatively use nails and glue.
Step 2
Attach the 1x10 inset in the back as shown.
Step 3
Attach the bottom shelf to the sides and back 1x10.
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
