Haley Simple Shelves
to make simple shelves.
Dimensions
Use the size-specific shopping and cut lists below.
What you need
- 1 - 1x8 @ desired length of shelf
- 1 - 1x4 @ desired length of shelf MINUS 5 1/2"
- 1 - 1x6 @ 12"
NOTE: Can be put together with pocket holes, countersunk screws or nails and glue
- 1 - 1x8 @ desired length of shelf
- 1 - 1x4 @ desired length of shelf MINUS 5 1/2"
- 2 - 1x6 @ 6"
- measuring tape
- square
- pencil
- safety glasses
- hearing protection
- kreg-jig
- drill
- jigsaw
- nailer
- countersink drill bit
Step by step
01
Step 1
Attach back to sides. If using pocket holes, also drill pocket holes facing upward for attaching top in later steps.
02
Next, attach top to sides and back.
When you hang, you can hang directly through back 1x4 into studs in walls.
03
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
