Wooden Tablet or Cookbook Stand
Build this easy and elegant wooden cookbook stand using basic tools and minimal materials—perfect for displaying your favorite recipe book or tablet while cooking. Designed with clean lines and a wide, stable base, this project complements any kitchen style. Whether you're a beginner or seasoned builder, the make it quick to assemble and easy to customize with your choice of stain or finish.
Dimensions
Use the size-specific shopping and cut lists below.
What you need
- About 20" of 1x8 board
- About 26" of 1x2 board
- wood glue
- 1-1/4" brad nails
- wood stain
- 1 - 1x8 @ 5" - one end cut at 30 degree bevel and other at 40 degree bevel, long point to long point measurement
- 1 - 1x8 @ 12-3/4"
- 2 - 1x2 @ 12-3/4"
- measuring tape
- safety glasses
- compound miter saw
- nailer
Step by step
Step 1
Attach the two 1x2 pieces together as shown.
Step 2
Attach to the back piece as shown.
Step 3
Measure and mark out the support location. Attach with glue and nails or screws as shown.
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
